Premium wood panels sustainably sourced
Engineered for professional acoustic applications, made accessible for commercial and residential use
Engineered with RT60 Live Tech® for optimal sound reverberation and echo absorption.
Designed to strive for a shorter reverberation time and reduced echo in any room where speech and conversations should be clear and neat, such as an office space, classrooms, meeting rooms, enclosed theaters, conference rooms, living rooms and any room in a house or apartment.
RT60 Live Tech® offers a good compromise if the room is to be used for both speaking and music (RT60 = <1.2 seconds).
All our panels come with a protective satin oil applied which will increase the richness and warmth of the wood.
Hand-oiled in our facilities before shipping, the satin oils penetrate the surface of the wood to nourish and enhance it and it helps keep the natural veneer wood strong and protect it from scratches and dents, ultimately avoiding wear and tear over the years.
Handcrafted using recycled acoustic felt and wood that come entirely from sources that we know and trust.
We are committed to becoming a circular business and enabling our customers to live a more sustainable life.
Renewable and recyclable materials are prerequisites for a better sustainable future. In a world of limited resources, we want to create a circular system where nothing is wasted, and old products become new resources.
Made to comply with international flame retardant and fire safety standards.
Class B flame-retardant panels offer limited contribution to fire and increased heat insulation, providing an additional layer of security and confidence.
The coating in the polyester fiber achieves a Euroclass rating of (B-s1,d0) according to standard EN 13501-1.
This indicates moderate flammability with a low smoke development.
All our panels are classified as E1. They do not emit more than 0.1 ppm of formaldehyde into the ambient air and contain only the formaldehyde that is naturally bound up in the wood.
This label characterizes wood products that are unobjectionable for almost all intents and purposes and may be used for interior finishing and furniture.
Meets European Commission E1 guidelines, and California Proposition 65 - OEHHA standards.
For Prime members, Same-Day Delivery is free and it is available across the US.
There are 3 installation methods:
1. Gluing straight onto the wall - A construction glue or grab adhesive is recommended for this.
2. Screwing directly into the wall (Recommended): Using black screws for the black backing option or silver or grey screws for the grey backing, the panels can be screwed directly into the wall through the acoustic felt. We recommend a minimum of 9 screws per panel at 3.15” intervals across the width and 24” intervals down the length of the panel. If installing into ceilings, make sure they are screwed into ceiling joists. Please make sure the correct fixings are used if going into plasterboard, for example.
3. Screwing the panels into 1.8” timber battens (Best Acoustics): We recommend screwing 1.8” timber batons to the wall and then screwing the panels directly into the batons through the acoustic felt to achieve optimum sound absorption. Combined with Rockwool behind the panels between the batons, this will achieve Class A sound absorption
They can be used in any interior settings including: home office, movie theatres, kitchens, living rooms, game rooms, and even mounted on the ceilings.
Each panel is 60cm length x 60cm width with 2.5cm thinckness
This wall panels are designed for indoor use only.
Yes, the panels have a satin oil finish which provides protection agains moist and humidity.
However, like any wood material is best to avoid direct contact with water.
Calculate using this method:
We recommend ordering one or two additional panels, just in case something goes wrong.
Yes, all our wall panels come with a protective satin oil applied which increases the color richness and warmth of the wood.
Additionally serves as a protective layer from wear and tear.
We recommend installing with batons, and can use mineral wool or other sound insulation material in-between the gaps, this will increase the sound absorption properties even further.
We recommend a dry cloth to remove any dust. You can also use a wood oil which will protect the natural wood and give a finished look.
Yes, the panels can be cut to any size. Make sure to use a wood saw blade that is sharp to ensure a clean cut.
To cut the panels, you can use a craft knife for lengthwise cuts or a hand/circular saw for crosswise cuts. Painting the slats is unnecessary as they’re made of MDF and have a satin oiled finish throughout.
Cut the acoustic wood panel and install it around the outlet or switch.
You can use any construction adhesive sold in a hardware store.
We recommend Loctite® Power Grab Adhesive for maximum performance.
For concrete or brick walls, use suitable concrete screws or anchors. Always pre-drill holes, if necessary, to prevent cracking or damaging the walls.
For plasterboard or plywood, regular black color wood screws or drywall screws are suitable. Make sure to choose screws that are appropriate for the thickness of the material.
Copyright © 2024 ECOACOUSTICS — All Rights Reserved
We are located in San Francisco, California ♡